High Quality Prumnopitys For Sale

New Zealand’s best Matai and Miro trees

Growing NZ natives in your garden delivers a vast range of benefits:

• They attract birds and bees
• It helps to preserve New Zealand’s species
• Greater biodiversity is created
• Children can learn the plants and become more involved with nature
• These plants will bring you pleasure for many years to come

We’ll help you find the right Matai or Miro for your space. Choose from a wide variety of New Zealand-native plants that have been eco-sourced and bred to thrive in NZ’s climate. We grow and stock only the highest quality plants, sourcing them from NZ’s leading nurseries. Each plant is packed and transported with extreme care, ensuring it arrives to you in the same condition it was in when it left the nursery. If you are wanting to buy Prumnopitys trees, shop with confidence from the best in the industry.

Common questions about growing Prumnopitys

1. How fast does a Miro tree grow?

The growth rate of a Miro tree (Prumnopitys ferruginea) can vary depending on several factors, such as climate, soil conditions, and available sunlight. However, in general, Miro trees are considered to be slow-growing conifers. According to the Tane's Tree Trust, the best height growth for Miro trees is about about 30 cm per year, while the best diameter growth is about 5.8 mm per year. This means that a Miro tree can reach a height of 25 meters and a trunk diameter of 1 meter after approximately 89 years.

Of course, these are just averages, and individual trees may grow faster or slower than this. For example, Miro trees that are planted in areas with well-drained soil and full sunlight may grow more quickly than those that are planted in shady areas or in soil that is poorly drained.

Overall, Miro trees are beautiful and long-lived trees that can make a valuable addition to any landscape. With proper care, they can provide years of enjoyment and beauty.

2. What conditions do Matai grow in?

Matai trees, scientifically known as Prumnopitys taxifolia, are native to New Zealand and are found throughout the country's lowland forests. They favor fertile, well-drained soils and can thrive in areas with low rainfall. Matai trees are typically found in mixed-species forests, where they co-exist with other conifers and broadleaf trees.

Here are the specific environmental conditions that Matai trees prefer:

1. Soil Type: Matai trees prefer deep, well-drained soils with a slightly acidic pH of around 5.5 to 6.5. They can tolerate a range of soil types, including sandy loam, clay loam, and volcanic soils.
2. Moisture Levels: Matai trees are moderately drought-tolerant and can survive in areas with annual rainfall as low as 600 millimeters. However, they prefer regular watering, especially during dry periods, to maintain healthy growth and prevent stress.
3. Sunlight Exposure: Matai trees are shade-tolerant and can grow in areas with partial shade or dappled sunlight. However, they prefer full sun exposure for optimal growth and flower production.
4. Temperature Range: Matai trees are generally frost-tender and prefer mild climates with temperatures ranging from around 10°C to 20°C. They can tolerate some frost, but prolonged exposure to temperatures below freezing can damage their foliage and stems.
5. Altitude: Matai trees are found in a wide range of altitudes, from sea level to around 760 meters in the North Island and 300 meters in the South Island. They are most commonly found in lowland forests, but can also grow in foothills and montane forests.
6. Associated Tree Species: Matai trees are often found in mixed-species forests, where they co-exist with other conifers such as rimu (Dacrydium cupressinum), kahikatea (Dacrycarpus dacrydioides), totara (Podocarpus totara), and miro (Prumnopitys ferruginea). They can also be found growing alongside broadleaf trees such as beech (Nothofagus fusca) and tawa (Beilschmiedia tawa).

Matai trees are an important part of New Zealand's native flora and play a vital role in maintaining healthy forest ecosystems. Their ability to tolerate a range of environmental conditions and their long lifespan make them a valuable addition to any landscape.

3. How do you grow Miro?

Growing Miro trees (Prumnopitys ferruginea) requires patience and proper care due to their slow growth rate. Here's a comprehensive guide on how to cultivate these beautiful conifers:

1. Site Selection: Choose a planting site that receives full sunlight or partial shade. Miro trees prefer well-drained soil with a slightly acidic pH of around 5.5 to 6.5. Avoid areas with heavy clay or poorly drained soil, as these conditions can lead to root rot.
2. Soil Preparation: Amend the soil with compost or other organic matter to improve drainage and nutrient content. If the soil is too acidic, add lime to raise the pH level.
3. Planting: Dig a hole that is twice as wide as the root ball and just as deep. Gently loosen the roots and place the tree in the hole, ensuring the root collar sits at ground level. Backfill the hole with soil and firm it around the base of the tree.
4. Watering: Provide regular watering, especially during the first few years after planting. Water deeply and infrequently, allowing the soil to dry out slightly between waterings. Avoid overwatering, as this can lead to root rot.
5. Mulching: Apply a layer of mulch around the base of the tree to conserve moisture, suppress weeds, and regulate soil temperature. Use organic mulch such as bark chips, wood shavings, or compost.
6. Feeding: Fertilise lightly in spring and autumn with a balanced fertilizer. Avoid using excessive fertilizer, as this can damage the roots.
7. Pruning: Prune lightly after flowering to remove dead or diseased branches and to encourage new growth. Avoid pruning too much, as this can stress the tree and slow its growth.
8. Pest and Disease Control: Monitor the tree for signs of pests and diseases. If you notice any problems, take appropriate action to control them.
9. Patience: Miro trees are slow-growing, and it may take several years to see significant growth. Be patient and provide consistent care, and your Miro tree will reward you with years of beauty and enjoyment.

4. What are the leaves of a Miro tree?

Miro trees (Prumnopitys ferruginea) are evergreen conifers with distinctive needle-like leaves. Their foliage is typically arranged in two rows along the stem, creating a feathery appearance. Here's a detailed description of Miro tree leaves:

1. Shape: Miro tree leaves are flattened and scale-like, with a pointed or acuminate tip. The margins of the leaves are smooth and entire.
2. Size: Miro tree leaves are relatively small, ranging from 1 to 2.5 centimeters in length and 2 to 3 millimeters in width.
3. Texture: The leaves have a soft and pliable texture, making them delicate to the touch.
4. Color: The upper surface of the leaves is a dark green color, while the underside is a lighter green or bluish-white color.
5. Arrangement: The leaves are arranged in two rows along the stem, forming a flattened, feathery appearance.
6. Retention: Miro trees are evergreen, meaning they retain their leaves throughout the year. The individual leaves can persist for three years before being replaced.
7. Significance: Miro tree leaves play an important role in the tree's physiology, providing photosynthesis for energy production and protection against harsh environmental conditions.

In summary, Miro tree leaves are characterized by their small size, flattened shape, soft texture, dark green upper surface, and lighter underside. They are arranged in two rows along the stem, creating a feathery appearance, and are retained throughout the year. These leaves play a vital role in the tree's survival and contribute to its overall beauty and aesthetic value.

5. What is the English name for the Miro tree?

The English name for the Miro tree is the brown pine. It is also sometimes called the rusty pine or the ferruginous podocarp. These names are all derived from the tree's leaves, which are a rusty brown color.

The scientific name for the Miro tree is Prumnopitys ferruginea. It is a member of the Podocarpaceae family, which also includes the rimu, kahikatea, and totara trees. The Miro tree is native to New Zealand and is found throughout the country's lowland forests.

Here are some of the other names for the Miro tree in different languages:

• Māori: Miro
• French: Pin brun de Nouvelle-Zélande
• German: Neuseeländische Rostkiefer
• Spanish: Pino marrón de Nueva Zelanda
• Portuguese: Pinheiro castanho da Nova Zelândia

6. What eats the Miro tree?

Miro trees (Prumnopitys ferruginea) are native to New Zealand and play an important role in the country's ecosystems. They are a food source for a variety of animals, including:

• Birds: Several species of birds eat the berries and seeds of Miro trees. These include:
  • Kereru (New Zealand pigeon): Kereru are large, green pigeons that are the main dispersers of Miro seeds. They eat the berries and defecate the seeds, spreading them to new areas.
  • Tui: Tui are medium-sized honeyeaters that eat the nectar of Miro flowers. They also eat the berries and seeds of the tree.
  • Kākā: Kākā are large parrots that eat the berries and seeds of Miro trees. They are also known to eat the bark of the tree.
• Insects: Several species of insects eat the leaves and shoots of Miro trees. These include:
  • Caterpillars: Caterpillars of various butterfly and moth species feed on Miro leaves.
• Other animals: Other animals that eat Miro trees include:
  • Possums: Possums eat the leaves and fruits of Miro trees.
  • Rats: Rats eat the berries and seeds of Miro trees.
  • Weta: Weta are large insects that eat the bark and leaves of Miro trees.

Miro trees are an important part of New Zealand's food web and provide sustenance for a variety of animals. They also play an important role in regenerating forests and maintaining healthy ecosystems.